Splitting The Keyboard Range And Playing Two Different Voices (Split Mode) (Clp-130) - Yamaha Clavinova CLP-120 Owner's Manual

Splitting the Keyboard Range and Playing Two Dif-
ferent Voices (Split mode) (CLP-130)
Split mode enables you to play two different voices on the keyboard — one with the left hand and
another with the right hand. For example, you can play a bass part using the Wood Bass or Electric
Bass voice with the left hand, and a melody with the right hand.
MIN MAX
TEMPO
MASTER VOLUME
START/STOP FUNCTION
MELLOW BRIGHT
BRILLIANCE DEMO METRONOME TEMPO / FUNCTION
Procedure
1.
Engage Split mode.
Press the button so that its indicator lights. The default setting
[SPLIT]
will be selected for the left-hand voice at first.
BASE)
The Function mode provides access to a number of other Split mode functions
(page 43). (If you make no settings for Split mode functions, the appropriate
setting will be set in each voice by default.)
2.
Specify the split point (the border between the
right-and left-hand range).
You can change the split point to any other key by pressing the key while hold-
ing the button (the name of the current split-point key appears on the
[SPLIT]
LED display while the
An example of split-point key display
(F 2)
followed by a high bar if sharp
The split point is initially set at the F 2 key by default.
If you do not need to change the split point, skip this procedure.
TEMPO/ OTHER VALUE
USER 1
USER 2
— /NO +/ YES PRESET USER 3
button is held).
[SPLIT]
(G2) (A 2)
followed by a low bar if flat
Voice buttons
GRAND GRAND E.PIANO E.PIANO HARPSI-
PIANO 1 PIANO 2 1 2 CHORD
TRACK TRACK START/STOP REC CHURCH JAZZ
1 2 ORGAN ORGAN STRINGS CHOIR GUITAR
SONG VOICE
(WOOD
CLP-130/120
[SPLIT]
E.CLAVI- VIBRA-
CHORD PHONE VARIATION
ROOM CHORUS
HALL 1 PHASER HARD
HALL 2 TREMOLO MEDIUM
WOOD
BASS E.BASS SPLIT STAGE DELAY SOFT ON
REVERB EFFECT TOUCH TRANSPOSE
NOTE
Dual (page 26) and Split
(page 26) modes cannot be
engaged simultaneously.
TIP
A specified "split point" key is
included in the left-hand range.
TIP
The split point can also be set
via Function 4 (page 43).
Selecting & Playing Voices 27