Backup Functions; F9. (Clp-130) / F8. (Clp-120) Backup Functions - Yamaha Clavinova CLP-120 Owner's Manual

F9.
(CLP-130)

Backup Functions

Backup:
You can back up some settings, such as voice selection and
reverb type, so that they will not be lost when you turn off the
power to the Clavinova.
If the backup function is turned on, the settings at power off
are effective. If the backup function is turned off, the settings
in memory are erased when you turn off the power. In this
case, when you turn on the power to the unit, the default set-
tings (the initial settings) will be used. (The factory setting
default list is found on page 70.)
However, the backup settings themselves, and the con-
tents of the user song recorder memory, are always
backed up.
CAUTION
Even if the backup function is turned on via one of the
functions described below, the data will be retained in
memory for only about one week if the power is not
turned on during this time. If the backup period is
exceeded, all settings will be reset to their default values.
If you want to retain the backup settings for longer peri-
ods, be sure to turn the power on for a few minutes at
least once a week.
You can turn the backup function on or off for
each function group (each of the following
sub-mode functions).
1. Engage Function mode and select
130)/ (CLP-120).
2. Press the [+/YES] button to engage the
backup function's sub-mode, then use the
[TEMPO/FUNCTION# M, L] buttons to select
the desired sub-mode.
Press the [–/NO] or [+/YES] button to turn the
backup function on or off.
Sub-mode
F9.1: /F8.1:
(CLP-130)
F9.2: /F8.2:
(CLP-130)
F9.3: /F8.3:
(CLP-130)
F9.4: /F8.4:
(CLP-130)
Setting range:
Normal setting: OFF (all groups)
48 Detailed Settings – [FUNCTION]
CLP-130/120
/ F8.
(CLP-120)
TERMINOLOGY
Voice
(CLP-120)
MIDI
(CLP-120)
Tuning
(CLP-120)
Others
(CLP-120)
ON/OFF
Description of sub-modes
F9.1:
(CLP-130)
• Voice (Keyboard, Dual, and Split <CLP-130>)
• Dual (ON/OFF, Voice, and Dual Functions for each
voice combination)
• Split (CLP-130) (ON/OFF, Voice, and Split Functions
for each voice combination)
• Reverb (ON/OFF, Type, and Depth for each voice)
• Effect (ON/OFF, Type, and Depth for each voice)
• Variation (CLP-130) (for each voice)
• Touch Sensitivity (including the FIXED volume)
• Metronome (Beat, Volume <
(CLP-120) settings>)
• Preset Song Part Cancel Volume (
<CLP-120> settings)
F9.2:
(CLP-130)
The MIDI functions (
120> settings)
(expect for the
<CLP-120>)
F9.3:
(CLP-130)
• Transpose
• Tuning (
• Scale (including base note) (
F9.4:
(CLP-130)
Other functions (
settings)
(CLP-
Factory Preset Recall
All Dual mode, Split mode, reverb, effect, touch sensitiv-
ity, tuning settings, and the settings affected by the
Backup Functions can be restored to their original fac-
tory preset values by holding the C7 key (right-most key
on the keyboard) while turning the
ON. This also erases all user song recorder data, and sets
all backup on/off settings (F9) to "OFF". (The factory set-
ting list is found on page 70.)
/F8.1: Voice
(CLP-120)
(CLP-130)/
<CLP-130>/
/F8.2: MIDI
(CLP-120)
<CLP-130>/
<CLP-130>/
/F8.3: Tuning
(CLP-120)
settings)
settings)
/F8.4: Others
(CLP-120)
<CLP-130>/ <CLP-120>
[POWER]
<CLP-
button