TEFAL BL115 Manual page 6

(B) to the mixer jug (C) and lock it by positioning it on the holes opposite the spout
(figure 3).
Introduce the measuring cup (A) into the lid and press into place (figure 3). You are advised to
hold the lid during operation.
slot on the motor unit (figure 3).
liquids, without going over the maximum level shown on the jug (1.5L).
2. Universal Mill: (Depending on model)
prevents access to the blades during use.
(F) and pour the ingredients.
mill blade unit (f2) (figure 4). Position the mill blade
unit (f2) on the bowl (f3), and lock the universal mill
by rotating the blade unit (f2) through a turn in the
clockwise direction (figure 5).
on the motor unit (D). The lock (open)
in the slot on the motor unit (D) (figure 6).
Rotate the assembled universal mill (F) though a turn
anticlockwise until the lock (closed)
selector (E) to "Pulse," "1," or "2".
To stop the appliance, bring the speed selector (E) to "0".
removing the universal mill (C).
opposite direction to installation.
blade unit (f2) from the bowl (f3) in the reverse order
of the assembly. The blades are very sharp: handle
them with caution to avoid injury. You can then collect
the preparation in the bowl.
Remark: The colour of the bowl may change after
blending certain very hard ingredients: cloves, cinnamon,
etc...
(C) on the body of the motor unit (D). The lock (open)
(C) through a turn the lock (closed)
(C) by unlocking it in opposite direction to installation.
(F) is equipped with a bowl (f3) that
(f1) in its recess on the
(F) and position it
appears (figure 6).
(F) by unlocking it in
(E) to "0".
is aligned
9
is aligned in the
appears (figure 3).
(C). It is best to start with
(E) to "Pulse," "1," or "2".
(C).
Caution: leaks can occur
if the accessory is not
locked correctly.