Table of Contents
Advertisement
Manual Mode
To select the Manual Mode, press the ENTER button to show the MANUAL Mode on the display.
Use the DOWN/UP button to select the Strobe/Dimmer Value/Red/Green/ Blue/ Grass Green/ or
Amber. Once the function or color has been selected, press the ENTER button to setup, use the
DOWN and UP button to change the value (0~255). Once the mode has been selected, press the
ENTER button to setup, go back to the functions without any change press the MENU button again.
Press and hold the MENU button about one second or wait for one minute to exit the menu mode.
Fixture Information
To select Fixture Information，press the ENTER button to confirm，Use the DOWN/UP button to
select the LED Temp.、Fixture Hours or Firmware version。
LED Temp.
To select the LED Temp., press the ENTER button to show LED TEMP. on the display, and the
display will show the temperature of the fixture. To go back to the functions without any changes
press the MENU button again. Hold and press the MENU button for one second or wait for one
minute to exit the menu mode.
Fixture Hours
To select the Fixture Hours, press the ENTER button to show FIXTURE HOURS on the display and
the display will show the number of working hours of the unit. To go back to the functions without
any changes press the MENU button again. Hold and press the MENU button for one second or
wait for one minute to exit the menu mode.
Firmware Version
To select the Firmware Version, press the ENTER button to show FIRMWARE VERSION on the
display and the display will show the version of software of the unit. To go back to the functions
without any changes press the MENU button again. Hold and press the MENU button for one
second or wait for one minute to exit the menu mode.
Factory Setting
13C
Advertisement
Table of Contents
