Font Orientation When Using Short-Edge Paper Feed - Xerox Printer User Manual

HOST FORMS DESCRIPTION LANGUAGE
2–8
Figure 2–6 shows the font orientations relative to the physical
page.
Figure 2–6. Font orientation
LANDSCAPE FONT
LANDSCAPE PAGE
Font orientation when using short–edge paper feed
Normally, stock feeds into the printer moving in the direction of
the page length. You assign each job a font with a landscape
orientation (characters align along the long edge of the page) or
a font with a portrait orientation (characters align along the short
edge of the page).
Some printers, such as the Xerox 4135 LPS, support paper sizes
up to 14.33 by 17 inches by allowing the stock to feed into the
printer moving in the direction of the page width. This is the
short edge feed (SEF) option. This reversal of the feed edge
reverses the font orientation the job must use. When printing a
landscape document using the SEF option, specify portrait fonts.
When printing a portrait document using the SEF option, specify
landscape fonts.
HOST FORMS DESCRIPTION LANGUAGE 3.2 FOR IBM MVS CREATING FORMS
PORTRAIT FONT
PORTRAIT PAGE