Xerox Printer User Manual page 91

XFP3005E Vertical text inconsistent with left/right
XFP3006E Identifier exceeds 6 characters
XFP3007E Stacked text and justify conflict
XFP3008E Setup command not allowed within section
XFP3009E Code point <code point> in font <font name> has a zero width
XFP3010E DO SECTION not allowed within section
XFP3011W Ambiguous positioning of <position>, <position> given. <position>,
<position> used
XFP3012E BEGIN SECTION not allowed within section
HOST FORMS DESCRIPTION LANGUAGE 3.2 FOR IBM MVS CREATING FORMS
Indication Vertical text is aligned LEFT or RIGHT instead of TOP or
BOTTOM.
Action Correct the text direction with the proper ALIGNMENT.
Indication An identifier name, such as FORM name, exceeded six
characters.
Action Correct the identifier name and recompile the form.
Indication Stacked text cannot be justified.
Action Remove the JUSTIFY and recompile the form.
Indication One of the setup commands such as FONT or INK was found
within a section.
Action Move the setup command to the beginning part of the FSL.
Indication Some of the characters in this font have a zero width value.
Action Reload the font.
Indication A DO SECTION command was found within a section.
Action Remove the DO SECTION command and recompile the form.
Indication Ambiguous positioning of text in a box such as Left, Left instead
of Left with Bottom, Center, or Top.
Action Correct the ambiguous position.
Indication A BEGIN SECTION command was found within a section.
Action Remove the command or end the current section.
MESSAGES
6–9