Xerox Phase 6200 Maintenance Instructions Manual

Regular Printer Maintenance

Your printer needs little maintenance other than periodic cleaning of the density sensor and replacing
the following Customer-Replaceable Consumables (CRCs) and Customer-Replaceable Units (CRUs):
Toner cartridges (black, cyan, magenta and yellow) — see page 17
I
I Imaging unit — see page 18
I Transfer roller — see page 23
I Fuser — see page 20
I Feed rollers — see page 25
Order extra printer supplies when the printer's front panel displays a warning that the consumable is
low or near the end of its life. You must replace the consumable when the front panel displays an error
message that the consumable is empty or at the end of its life. For part number information, refer to the
Supplies section of the Support Guide on the Interactive Documentation CD-ROM. To order
consumables and other supplies, visit the
includes installation instructions in the package.
Caution
Keep the imaging unit out of direct sunlight. Otherwise, faded images, light areas or dark
bands may result. Do not place the printer near vents or dust-producing equipment.
Warning
Do not burn the old toner cartridges, the imaging unit, the transfer roller, or the fuser.

Cleaning the outside of the printer

You can clean the outside of the printer with a soft, damp well-wrung cloth. You can use a cloth
moistened with a mild neutral detergent to remove stains; do not spray detergent directly onto the
printer.
Warning
To prevent electric shock, turn the printer off and unplug the power cord before cleaning the
printer.
Caution
Do not use a vacuum cleaner to clean the printer. Do not lubricate the printer with oil.
Copyright © 2002 Xerox Corporation. All Rights Reserved.
Phaser® 6200 Supplies and Accessories web
Phaser® 6200 Color Laser Printer
site. Each item
14