Install The Intelligent Gateway Usb Driver - Macintosh - 2Wire Intelligent Gateway 1800 User Manual

Install the Intelligent Gateway USB driver — Macintosh
Before installing your Intelligent Gateway software, you must install the Intelligent Gateway USB driver
on your computer. The following screens show the installation under Macintosh OS 10.2 and may vary
somewhat on Macintosh OS 8.6 to 9.X.
Power on your computer.
1.
Insert the Intelligent Gateway Setup Wizard CD
2.
in your computer's CD-ROM drive.
Double-click the 2Wire USB folder to install
3.
the driver.
If you have set up an administrator name and
4.
password, the Authenticate screen opens. Enter
your administrator name and password and
click .
OK
Follow the on-screen instructions. When the
5.
driver installation is complete, you will be
prompted to restart your computer.
After your computer restarts, connect a USB
6.
cable from your Macintosh computer to the
Intelligent Gateway USB port.
Establish your connection. Open the network
7.
Control Panel and select the
Apple icon>System Preferences...>Network
.
10