Install The 2Wire Gateway Usb Driver - Windows; Install The 2Wire Gateway Usb Driver - Macintosh; Check Your Connections - 2Wire Gateway 2070 Series Installation Manual

Hide thumbs Also See for Gateway 2070 Series:
Table of Contents

Advertisement

Install the 2Wire Gateway USB Driver - Windows

Power on your computer and place the 2Wire CD in your computer's CD-ROM drive.
1.
If the Add Hardware Wizard displays, follow the on-screen instructions. If prompted to identify where to
2.
search for drivers, deselect
After the driver installs click
3.
when your PC has rebooted.
Note:
Microsoft Windows 98 users may be prompted to insert the Windows 98 installation
CD-ROM after installing the 2Wire gateway USB drivers. After the Windows 98 updates are
complete, remove the Windows 98 CD and reinsert the 2Wire CD into your CD-ROM prior to
rebooting your PC.

Install the 2Wire Gateway USB Driver - Macintosh

Note:
The 2Wire gateway supports USB for Macintosh OS 8.6, 9.2, 10.1.4, 10.1.5, 10.2.0,
10.2.1 to 10.2.6, 10.3.3 to 10.3.9, 10.4.0, and 10.4.1.
Before making your USB connection to the gateway, you must install the 2Wire gateway USB driver on your
computer. The following instructions are for USB installation on Macintosh computers running OS 10.2.
Power on your computer and place the 2Wire CD in your computer's CD-ROM drive.
1.
Double-click the 2Wire CD icon on your desktop.
2.
Double-click 2Wire USB to begin the driver installation.
3.
If you have set up an administrator name and password, the Authenticate screen opens. Enter your
4.
administrator name and password and click
Follow the on-screen instructions. When the driver installation is complete, you will be prompted to
5.
restart your computer.
After your computer restarts, connect the provided blue USB cable from the
6.
gateway to your computer's

Check Your Connections

With your computer completely started, verify the
gateway are green. If they are not, see "Understanding the Indicator Lights" on page 15. The
indicator light will not turn green until the gateway software has been installed and an Internet connection has
been established.
and check
Floppy Disk drive
to complete the driver installation. The Setup Wizard will resume
Finish
.
OK
port.
USB
POWER
Connect the First Computer to the Gateway
.
CD-ROM drive
USB-PC
and
indicator lights on the front of the 2Wire
USB
port on the 2Wire
INTERNET
6

Advertisement

Table of Contents
loading

Table of Contents