Specifications And Options; Specifications; Options - Icom IC-M2A Instruction Manual

Specifications
• GENERAL
Frequency coverage : Transmit 156.025–157.425 MHz
Mode : FM (16K0G3E)
Channel spacing : 25 kHz
Current drain (at 7.2 V) : TX High (5 W)
Frequency stability : ±10 ppm (–20°C to +60°C)
Useable temperature range : –20°C to +60°C; –4°F to +140°F
: 61 (W) × 135(H) × 41(D) mm
Dimensions
(Projections not included)
Weight : 360g (12.7 oz)
• TRANSMITTER
Output power (at 7.5 V) : 5 W, 3 W and 1 W
Modulation system : Variable reactance frequency modu-
Max. frequency deviation : ±5.0 kHz
Spurious emissions : Less than –65 dB
• RECEIVER
Receive system : Double-conversion superheterodyne
Sensitivity (12 dB SINAD) : 0.25 µV typical
Squelch sensitivity : Less than 0.35 µV (at threshold)

SPECIFICATIONS AND OPTIONS

Receive 156.025–163.275 MHz
1.5A typical.
Max. audio 200 mA typical
Power saved 20 mA typical
2.4 (W) × 5.3 (H) × 1.6 (D) in
lation
Intermodulation rejection ratio
Spurious response rejection ratio
Adjacent channel selectivity
Audio output power
All stated specifications are subject to change without
notice or obligation.

Options

• BC-150 BATTERY CHARGER + BC-147A AC ADAPTER
Used for regular charging of battery pack. The same as supplied with
the transceiver. Charging time: approx. 8 hours
• BP-223 BATTERY CASE
Battery case for R6(AA) × 6 alkaline cells. The same as supplied with
the transceiver.
• BP-224 BATTERY PACK
Battery pack for Ni-Cd cells. The same as supplied with the trans-
ceiver.
• BC-119N DESKTOP CHARGER + AD103 CHARGER ADAPTER +
1
BC-145 AC ADAPTER*
For rapid charging of battery packs. An AC adapter is supplied with
the charger. Charging time: approx. 1–2 hours
* Not supplied with some versions.
1
• MB-87 ROTARY BELT CLIP
Belt clip for rotary type. The same as supplied with the transceiver.
11
: 70 dB typical
: 70 dB typical
: 70 dB typical
: 350 mW typical at 10%
distortion with an 8 Ω
load
25