Mounting The Evaporator Unit - WhisperKool SS7000 Owner's Manual

MOUNTING THE EVAPORATOR UNIT

1. Disassemble evaporator unit.
In order to mount the housing to the wall, the internal components will need to be removed and
reinstalled after mounting the housing. Remove front cover and thermostat by unscrewing four
captive screws located on each corner of the cover and five at bottom of front cover.
Note: Thermostat is not plugged into electrical line.
2. Remove interior assembly.
The interior assembly is one piece. The assembly should slide out on mounting rails as one
piece.
-12-