Pyrolysis - Asko OP8478G Instructions For Use Manual

CLEANING

Pyrolysis

Instead of cleaning manually, you can clean the oven space or an
enamelled baking tray using the 'Pyrolysis' oven feature. During
pyrolysis the oven space is heated to a very high temperature.
Contaminants that are present incinerate at this high temperature
and only ash remains.
With average use of the oven, we recommend running the pyrolysis
function once per month.
Caution!
• First, remove all accessories and guide rails / telescopic guide rails
from the oven (see 'Removing and cleaning the guide rails').
• Then remove any remaining food from the oven space and wipe the
space with a damp cloth. Chunks of food and fat may ignite during
the pyrolysis process. Fire hazard!
Note! The oven space and an enamelled baking tray cannot be cleaned
at the same time using the pyrolysis function. If you want to clean an
enamelled baking tray using pyrolysis, then do this first (the oven space
can become dirty due to the cleaning of the baking tray). Insert one
baking tray at a time. After that, the oven space can be cleaned.
Caution! Do NOT clean the glass baking tray using the 'Pyrolysis'
oven feature.
Starting the Pyrolysis function
1. Make sure the oven space is completely empty and no chunks of
food and fat are present!
2. If you want to clean an enamelled baking tray first, place the special
pyrolysis guide rails in position. Wipe the baking tray with a damp
cloth and slide the baking tray into the oven on Level 2.
▷ Remove these special pyrolysis guide rails after the
cleaning process.
3. Tap on 'EXTRAS' to show the appliance's extra functions.
4. Tap on 'PYROLYSIS' to open the pyrolysis function.
5. Select the desired cleaning intensity:
▷ Low: approximately 3 hours
▷ Average: approximately 3,5 hours
▷ High: approximately 4 hours
EN 39