Table of Contents
Advertisement
CLEANING
Removing and cleaning the guide rails
EN 40
Only the cleaning intensity can be selected. The time is fixed and
depends on the selected cleaning intensity.
6. Press on the confirm key to start pyrolysis clean.
• After a certain period the oven door will be locked automatically for
your own safety.
• An unpleasant smell may be released from the oven during the
cleaning process.
• The oven door can be opened once the appliance has cooled down
(after the end of the pyrolysis cleaning).
• When the oven has cooled down, you can easily wipe away most
residues with a damp cloth. Depending on soiling levels in the
oven, there may be visible deposits on the door and below in the
oven cavity. This is best removed using a non-abrasive sponge and
a mild solution of warm water and washing-up liquid. Only warm
water and washing-up liquid is normally enough to clean the sealing
because this is only dust. Wipe the oven door and the adjacent
surfaces around the door seal. Do not rub the seal.
Use conventional cleaning products to clean the guide rails.
• Remove the screw using a screwdriver.
• Remove the guide rails from the holes in the back wall.
Advertisement
Table of Contents
