Removing The Oven Window; The Cleaning Function (Pyrolysis) - Asko OP8637A Instructions For Use Manual

CLEANING

Removing the oven window

The Cleaning function (pyrolysis)

EN 24
The glass in the oven door can be cleaned from the inside, but you do
need to remove the glass from the door to do this. First remove the
oven door (see chapter 'Removing the oven door').
1. Lift the brackets on the left and right side of the door upwards
slightly (to marker 1 on the bracket) and pull this away from the
glass slightly (to marker 2 on the bracket).
2. Grasp the glass at the bottom and gently lift this upwards to
remove it from the support.
3. The inner third glass (depending on the model) can be removed by
lifting this carefully and removing it. Also remove the rubber seals
around the glass.
To replace the glass pane, observe the reverse order. The markings
(semicircle) on the door and the glass pane should overlap.
Instead of cleaning manually, you can clean the oven space or an
enamelled baking tray using the 'Pyrolysis' oven feature. During pyrolysis
the oven space is heated to a very high temperature. Contaminants that
are present incinerate at this high temperature and only ash remains.
With average use of the oven, we recommend running the pyrolysis
function once per month.
Caution!
• First, remove all accessories and guide rails / telescopic guide rails
from the oven (see 'Removing and cleaning the guide rails').