Advertisement
www.insigniarange.com
Last Modified: 08/10/2015
Foot Massager
Monsoon Shower
Body Jets
Hand Shower
Shower Valve
Connect the hoses to the corresponding inlets on the back of the shower.
Device output may differ from the image. Please refer to your outer chrome faceplate in-
side your Insignia shower as a reference point.
IF YOUR DIAL DOES NOT CORROSPOND TO THE APPROPRIATE DEVICE:
Turn on your water to the shower and note which output the water exits from then turn off
the water and swap over the relevant hose.
Alternatively remove the outer chrome knob by removing the chrome cap and loosening
the grub screw (please ensure not to unscrew fully as this will drop within the chrome
knob) this is found on the opposite side to the chrome pillar. Once you have succeeded in
loosening this you can now slide your faceplate to correspond to the device.
Cold Water Inlet
Hot Water Inlet
Open Outlet For
Steam Generator
20
Advertisement
