Advertisement
Foot Massager
Fix the provided white plastic foot mas-
sage retaining knobs to your glass back
panel along with your chrome water out-
let as shown in the above image. To
hang the foot massager itself to the wall,
push the massager onto the retaining
knobs ensuring the holes on the under-
side of the foot massager are aligned.
www.insigniarange.com
Monsoon Head
Attach the grey hose from your valve to the
inner black tube using PTFE tape (please
note this only needs to be hand tight. Over
tightening will snap/damage the inner black
tube)
Last Modified: 08/10/2015
Ozone (o3)
Unscrew the chrome pepper
pot end and drop the white box
upside down into the rear hole
as shown in the image. Now
from the inside of the shower
re-attach the chrome pepper
pot end and tighten.
18
Advertisement
