Page 3
If plug is entered correctly, it will slide in smoothly. To disconnect sensors do not pull at the cable but at the plug (to open locking mechanism). SIKA Dr.Siebert & Kühn GmbH & Co. KG ·• Struthweg 7–9 • 34260 Kaufungen • Germany • +49 5605 803-0 •...
Page 4
Note: If a zero-point adjustment was carried out, this will be signalled by the short displaying of „Corr“ when switching on the device. SIKA Dr.Siebert & Kühn GmbH & Co. KG ·• Struthweg 7–9 • 34260 Kaufungen • Germany • +49 5605 803-0 •...
Page 5
Standard setting: 'off' =0.000, i.e. value is not corrected. Together with the zero displacement (see above) this factor is mainly used to compensate for sensor deviations. SIKA Dr.Siebert & Kühn GmbH & Co. KG ·• Struthweg 7–9 • 34260 Kaufungen • Germany • +49 5605 803-0 •...
Page 6
Read kind of measuring of sensor Reset Read kind of measuring of display Program version SIKA Dr.Siebert & Kühn GmbH & Co. KG ·• Struthweg 7–9 • 34260 Kaufungen • Germany • +49 5605 803-0 • +49 5605 803-54 • info@sika.net • www.SIKA.net...
Page 8
This device must not be disposed as ‘residual waste’. To dispose this device, please send it directly to us (adequately stamped). We will dispose it appropriately and environmentally friendly. SIKA Dr.Siebert & Kühn GmbH & Co. KG ·• Struthweg 7–9 • 34260 Kaufungen • Germany • +49 5605 803-0 •...
Need help?
Do you have a question about the MH3111 and is the answer not in the manual?
Questions and answers