Panasonic OmniVision PV-DR2714 Operating Instructions Manual page 52

Starting from a selected item
RAM DVD-R DVD-V
Starting play from a selected title, chapter or track.
1
Press NUMBER keys to select the item during play
or while stopped.
e.g., 5: [0] [5]
15: [1] [5]
MP3
e.g., 5: [0] [0]
15: [0] [1]
115: [1] [1]
Notes:
• This may not work with some discs.
• This works only when stopped (screen saver is displayed on the
television) with some discs.
Slow-motion playback
RAM DVD-R DVD-V
1
Press FF/SLOW or
paused.
• On the unit, hold down
• When slow motion play is continued for about 5 minutes it pauses
automatically.
To return to normal speed
Press PLAY/×1.3.
Notes:
• The speed increases up to 5 steps.
• Press PLAY/×1.3 to restart play.
Quick View
(Only with Dolby Digital)
RAM
The play speed can be increased without distorting the audio.
1
Hold down PLAY/×1.3 during play.
To return to normal speed
Press PLAY/×1.3.
Notes:
• Output is in PCM when using a digital connection. (p. 14)
• This is cancelled when you perform skip, pause, or when play reaches a
point where a program recorded in sound other than Dolby Digital starts.
• This does not work if the setting is "Off" in "Search Audio & PLAY×1.3".
(p. 68)
• This does not work when recording is in XP or FR mode during
simultaneous recording and play. (p. 48).
52
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
CD MP3
[5]
[5]
[5]
REW/SLOW while
or .
Frame-by-frame viewing
RAM DVD-R DVD-V
1
Press FRAME or FRAME
To return to normal speed
Press PLAY/×1.3.
Notes:
• Each press shows the next frame.
• Press PLAY/×1.3 to restart play.
• Whether pictures are advanced by "Field" or "Frame" is selected
automatically (see page 68.)
Displaying the television image as a
picture-in-picture
RAM
1
Press TIME SLIP during play.
The unit displays the television image as a picture-in-picture.
• You will hear the playback audio.
• Press TIME SLIP again to cancel.
Play images
Current receiving images
• You can change the channel being
received by pressing CH
• You cannot change the channel
being received while recording.
To show the play images in full
Press TIME SLIP.
Skipping the specified time (Time Slip)
RAM
1
Press TIME SLIP during play.
2
Press to select the time while the indication is
displayed.
• The time indicator will go off after about 5 seconds, but will turn on
again when you set the indicator.
• Press to alter in one-minute units. Press and hold
in 10-minute units.
3
Press ENTER.
• Play skips the specified time.
while paused.
PLAY
CH08
.
PLAY
to alter
0 min
0 min