Panasonic OmniVision PV-DR2714 Operating Instructions Manual page 33

Zero Search
To quickly return to a specific tape counter location.
1
Press COUNTER RESET during playback to display
the Counter.
2
While (counter is displayed), Press COUNTER
RESET at the desired position to reset to "0:00.00."
3
Continue to record, playback etc.
4
Press STOP.
5
Press CM/ZERO in Stop mode to start ZERO
SEARCH.
• Unit will go into FF or REW mode and stops at the last point the
Counter was set to 0:00.00.
Audio Mode for Playback
Choose the type of sound track for playback.
1
See the "Playback a Tape" section on page 32 to
playback the tape.
2
Press AUDIO repeatedly (each press within 5
seconds) to select desired mode.
• Select "HIFI (L/R)," to listen to a regular Hi Fi Stereo recording.
Select "HIFI (L)" or "HIFI (R)" to listen only to the left or right channel
of a stereo recording. This is commonly used for Karaoke, music
on one channel and vocal on the other. Select "NORMAL" for linear
stereo playback from a recorded tape with Hi Fi disabled.
• This screen appears when you press AUDIO during playback.
Index Search
Search System is ...
Each time a recording is made, an invisible index mark is placed
on the tape. When timer recordings are made, program index
and information are also included. These index marks can be
used to access or scan recordings.
Go directly to the desired recording.
1
0:00.00
Press SEARCH in Playback or Stop mode to display
INDEX SEARCH screen, and then press NUMBER
keys to select the recording number.
2
Press FF or REW to start search.
Example 1:
To go to rec. 2 from rec. 4, enter 3 and press REW.
Example 2:
To go to rec. 6 from rec. 2, enter 4 and press FF.
NOTE: indicates start points of each recording.
Note:
• If Index Search is started very close to an index mark, that index
3
Play begins at search end. To search forward or
back 1 index, press FF or REW while screen below
is displayed (10 seconds).
To cancel,
press STOP.
HIFI(L/R)
HIFI(L)
HIFI(R)
NORMAL
1 2 3 4 5
1 2 3 4 5
mark may not be counted in the search.
INDEX SEARCH
ENTER INDEX NUMBER :1
USING 1-9 KEYS
FORWARD SEARCH :FF
REVERSE SEARCH :REW
EXIT :RETURN
6 7
6 7
INDEX SEARCH
FORWARD SEARCH :FF
REVERSE SEARCH :REW
33