Timer Recording - Panasonic OmniVision PV-DR2714 Operating Instructions Manual

Review, Replace or
Clear Program Con tents :
(Recording is not in progress)
1
Press PROG/CHECK to display SET TIMER
PROGRAM screen.
2
Press to select "VCR."
3
Press SET to display screen.
4
Press to select the desired program.
To Replace program...
a. Press SET to display.
b. Press to select and press SET or
program contents.
c. Press RETURN.
To Clear program...
Press ADD/DLT.
5
Press RETURN to exit this mode.
Notes:
• 2 minutes before Timer recording is performed, "PLEASE PREPARE FOR
VCR TIMER REC" appears. Be sure a cassette with record tab is loaded
and the unit is in Stop mode.
• If the start times of two programs overlap, the lower numbered program
will have priority.
• If the start time for a Timer Recording comes up during a normal recording
or One Touch Recording (page 29), the Timer Recording will not be
performed.
• If there is a power interruption of more than one minute, the recording may
not be performed or continued.
• If "INCOMPLETE" appears after all items have been set, check all entries
and make necessary corrections.
Cancel a Timer Re cording:
(Recording is in progress)
1
Hold down STOP for a few seconds to cancel the

Timer Recording.

• Any future daily or weekly recordings will be performed as
SET TIMER PROGRAM
DVD VCR
SELECT: SET:SET
END :RETURN
P DT START STOP CH SPD
1 10 9:00a12:00p 08 SP
2day 11:00a11:30a125 SP
3 12 8:00p 9:30p L1 EP
4 -- --:-- --:-- -- --
CANCEL:ADD/DLT
SELECT: SET:SET
END :RETURN
to set new
P DT START STOP CH SPD
1 10 9:00a12:00p 08 SP
2day 11:00a11:30a125 SP
3 12 8:00p 9:30p L1 EP
4 -- --:-- --:-- -- --
CANCEL:ADD/DLT
SELECT: SET:SET
EXIT :RETURN
P DT START STOP CH SPD
1 -- --:-- --:-- -- --
2day 11:00a11:30a125 SP
3 12 8:00p 9:30p L1 EP
4 -- --:-- --:-- -- --
SELECT: SET:SET
END :RETURN
programmed.
31