Panasonic OmniVision PV-DR2714 Operating Instructions Manual page 34

Commercial Skip
By pressing CM/ZERO in Playback mode you can skip over 1, 2,
or 3 minutes of recorded tape as desired.
1
Press CM/ZERO repeatedly to select skip time in
Playback mode.
Note:
• No indication appears.
Auto Playback
Insert a tape in Power off mode.
Power turns on, Play.
Note:
• Playback begins if tape has no record tab.
Auto Rewind
(except for Recording)
Tape reaches its end
Rewind, Stop.
Playback Auto Eject
(Repeat Play must be "OFF")
Tape with no record tab reaches its end
Rewind, Stop, Eject.
34
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
1st Press 2nd Press
1 min skip 2 min skip
3rd Press
OFF
3 min skip
Digital Auto Tracking
Continuously analyzes the signal and adjusts for optimum picture
quality.
Manual Tracking Control
Use during Playback and Slow Motion mode to reduce picture
noise. Press CH on the Remote Control or the unit until the
picture clears up. To return to Auto Tracking, press POWER off,
then on again a few seconds later.
V-Lock Control
In Still mode, CH operate as a V-Lock control to reduce jitter.