Tuning Tv - Panasonic OmniVision PV-DR2714 Operating Instructions Manual

Tuning TV

EJECT
POWER
NUMBER
Keys
ADD /
DLT
STOP
SELECT
/
SET
POWER STOP/EJECT
Initial Setup (Ready to Play)
Please make all cable or antenna connections before powering on.
Plug the unit power cord into an AC wall outlet.
1
Press POWER on the Remote Control or unit. Auto
channel and clock set starts.
• If you use a cable box, turn it on and set it to the Public Broadcasting
Service (PBS) channel in your time zone. If you use a DSS receiver,
it must be turned off.
• Function buttons are void during Initial Setup.
• To eject a tape during Auto Set, press the unit STOP/EJECT button twice.
Then, make settings manually. (See pages 17-18.)
• If Auto Clock Set takes more than 30 minutes, press STOP and perform
settings manually. (See pages 17-18.)
Case 1
Settings are made automatically. When
complete, this screen appears.
16
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
CH
ACTION
RETURN
FF PLAY / REPEAT
CH AUTO SET PROCEEDING
AUTO CLOCK SET
PROCEEDING
CANCEL:STOP
10/25/2004 MON 11:45AM
DST:ON
SETTING : CH 10
AUTO CLOCK SET
COMPLETED
Case 2
If setup is incomplete, the following
screen appears. Check connection of
Antenna/Cable to the RF in Terminal,
then try to manually set the clock as
follows.
a
. Press ACTION on the Remote Control to display
SET CLOCK Menu screen.
b
. Press to select the month and press SET to
set. In the same manner, select and set the date,
year, time, and DST (Daylight Saving Time).
• Press repeatedly to move the cursor. Press
correction.
c
. Press RETURN twice to start CLOCK and exit.
Automatic Channel Setting
1
Press ACTION to display MAIN MENU.
2
Press to select "CH."
3
Press SET to display SET UP CHANNEL screen.
4
Press to select "ANTENNA," then press SET to
set your antenna system ("TV" or "CABLE").
5
Press to select "AUTO SET," then press SET.
Note:
• After Channel Auto Set is finished, Clock Auto Set will be performed. (If
clock is set manually, Clock Auto Set will not be performed.)
AUTO CLOCK SET
IS INCOMPLETE
PLEASE SET CLOCK BY
PRESSING ACTION KEY
SET CLOCK
1/ 1/2004 THU 12:00PM
DST:ON
SELECT: SET:SET
START :RETURN
to make a
SET CLOCK
10/25/2004 MON 11:45AM
DST:ON
SELECT: SET:SET
START :RETURN
MAIN MENU
DVD LOCK LANGUAGE
TV CLOCK CH
SELECT: SET:SET
END :RETURN
SET UP CHANNEL
ANTENNA : CABLE
AUTO SET
WEAK SIGNAL DISPLAY:OFF
SELECT: SET:SET
END :RETURN