Playing Vcr - Panasonic OmniVision PV-DR2714 Operating Instructions Manual

Playing VCR

EJECT
NUMBER
keys
STOP
PAUSE
CM / ZERO
SEARCH
Insert CH
a tape
Playback a Tape
1
Insert a tape with record tab. (p.28)
• The unit power comes on automatically.
2
Press PLAY to play a tape.
• If tape has no record tab (see page 6), auto play begins.
Note:
• To reduce picture noise, see "Manual Tracking Control" on page 34.
Forward/Reverse scene search
a. Press FF/SLOW+ or REW/SLOW-.
b. Press PLAY to release.
After search has begun, each additional press of FF or REW
changes speed.
• FF and REW search speed may vary depending on current
tape position.
• After 10 minutes in search mode, unit returns to Play mode
to protect the tape and the video heads.
Still (Freeze) picture
a. Press PAUSE.
b. Press PLAY to release.
32
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
VCR
CH
(TRACKING)
REW/SLOW-
FF/SLOW+
PLAY
AUDIO
COUNTER
RESET
STOP / PLAY / REPEAT
EJECT
Slow Motion picture
a. Press PAUSE.
b. Press FF/SLOW+ (increases speed) or REW/SLOW-
(decreases speed) in Still mode.
c. Press PLAY to release.
Frame by Frame picture
a. Press PAUSE.
b. Press PAUSE in Still mode.
c. Press PLAY to release.
Notes:
• These features work best in EP mode.
• After 3 minutes in Still or Slow mode, unit stops to protect the tape and
the video heads.
Stop a Tape
Press STOP.
Rapid Rewind tape
Press REW/SLOW- in Stop mode.
Rewinds a T-120 tape in approx. 1 minute.
Rapid Fast forward tape
Press FF/SLOW+ in Stop mode.
Eject tape
Press EJECT on the Remote Control or STOP/EJECT on
the unit.
Repeat Play
Set to see a recording over and over.
To turn "ON"
Press PLAY/REPEAT on the unit repeatedly in Play mode to
select "REPEAT ON."
To turn "OFF"
Repeat above to select "REPEAT OFF."
Notes:
• Playback repeats when tape end is reached or an unrecorded portion
longer than 30 seconds is detected.
• For repeat play in disc mode, see pages 55-56.
PLAY
REPEAT ON