HIKVISION DS-7100HGHI-E1 User Manual page 74

After the adding of the IP cameras, the basic information of the camera is listed on the interface,
and you can configure the basic settings of the IP cameras.
Step 1 Click the
parameters.
Channel Port: If the connected device is an encoding device with multiple channels, you can
choose the channel to connect by selecting the channel port No. in the dropdown list.
Step 2 Click OK to save the settings and exit from the editing interface.
Step 3 Drag the horizontal scroll bar to the right side and click the
parameters.
Step 4 You can edit the network information and the password of the camera.
Digital Video Recorder User Manual
icon to edit the parameters. You can edit the IP address, protocol and other
Figure 2-8 Edit IP Camera
Figure 2-9 Network Configuration of the Camera
73
icon to edit the advanced