HIKVISION DS-7100HGHI-E1 User Manual page 234

Step 3 Make sure the usage of the eSATA disk is set as Export.
If not, click the Set button to set it. Choose Export and click the OK button.
The capacity of destination disk must be the same as that of the clone source disk.
Step 4 Check the checkbox of the HDD to be cloned in the Clone Source list.
Step 5 Click the Clone button and a message box pops up.
Step 6 Click the Yes button to continue.
You can check the clone progress in the HDD status.
Digital Video Recorder User Manual
Figure 14-22 Disk Clone Configuration Interface
Figure 14-23 Setting eSATA Usage
Figure 14-24 Message Box for Disk Clone
233