HIKVISION DS-7100HGHI-E1 User Manual page 10

change detection, face detection and vehicle detection and heat map or people counting
functions. You can only enable one function;
 DS-7208/7216HUHI-F/N series DVR supports enhanced VCA mode to enable all-channel line
crossing detection and intrusion detection and disable 2K/4K output resolution. After you
enable it, you can also disable it and the line crossing detection and intrusion detection will be
supported by 2-ch only;
 For DS-7200HUHI-F/S series DVR, the enhanced VCA mode conflicts with the 2K/4K output
and 4 MP/5 MP signal input;
 Privacy mask;
 Several PTZ protocols (including Omnicast VMS of Genetec) supported; PTZ preset, patrol and
pattern;
 Zooming in/out by clicking the mouse and PTZ tracing by dragging mouse.
HDD Management
 Each disk with a maximum of 8 TB storage capacity for DS-9000HUHI-F16/N series DVR and 6
TB for other models;
 8 network disks (8 NAS disks, 8 IP SAN disks or n NAS disks + m IP SAN disks (n+m ≤ 8)) can be
connected;
 Remaining recording time of the HDD can be viewed;
 Supports cloud storage;
Cloud storage is only applicable to HQHI-F/N and HUHI series DVR.
 S.M.A.R.T. and bad sector detection;
 HDD sleeping function;
 HDD property: redundancy, read-only, read/write (R/W);
 HDD group management;
 HDD quota management; different capacity can be assigned to different channels.
 For DS-7300/8100/9000HUHI-F/N series, hot-swappable HDD supporting RAID0, RAID1, RAID5,
RAID 6 and RAID10 storage scheme, and can be enabled and disabled on your demand. And 16
arrays can be configured.
Recording, Capture and Playback
Capture is supported by DS-7300/8100/9000HUHI-F/N series DVR only.
 Holiday recording schedule configuration;
 Cycle and non-cycle recording modes;
 Normal and event video encoding parameters;
Digital Video Recorder User Manual
9