Deleting Array - HIKVISION DS-7100HGHI-E1 User Manual

Step 1 Enter the Array Settings interface. The disk 3 is lost.
Menu > HDD > RAID > Array
Step 2 Click Array tab to return to the Array Settings interface and click
rebuild.
At least one available physical disk should exist for rebuilding the array.
Step 3 Select the available physical disk and click OK button to confirm to rebuild the array.
Step 4 The "Do not unplug the physical disk when it is under rebuilding" message box pops up.
Click OK button to start rebuilding.
Step 5 You can enter the Array Settings interface to view the rebuilding status.
Step 6 After rebuilding successfully, the array and virtual disk will restore to Functional.

13.3 Deleting Array

Deleting array will cause to delete all the data saved in the disk.
Step 1 Enter the Array Settings interface.
Menu>HDD>RAID>Array
Digital Video Recorder User Manual
Figure 13-13 Array Settings Interface
Figure 13-14 Rebuild Array Interface
220
to configure the array