Configuring Quota Mode - HIKVISION DS-7100HGHI-E1 User Manual

Step 3 Set the HDD property to R/W, Read-only or Redundancy.
Step 4 Click the OK button to save the settings and exit the interface.
Step 5 In the HDD Information menu, the HDD property will be displayed in the list.
At least 2 hard disks must be added on your DVR when you want to set a HDD to Redundancy, and
there is one HDD with R/W property.

14.4 Configuring Quota Mode

Purpose
Each camera can be configured with allocated quota for the storage of recorded files.
Steps
Step 1 Enter the Storage Mode interface.
Menu > HDD > Advanced
Step 2 Click the Storage Mode tab.
Step 3 Set the Mode to Quota, as shown in Figure 14-16.
The DVR must be rebooted to enable the changes to take effect.
Digital Video Recorder User Manual
Figure 14-15 Set HDD Property
228