Checking And Editing Firmware - HIKVISION DS-7100HGHI-E1 User Manual

Step 2 Select an array and click
Step 3 In the pop-up message box, click Yes button to confirm the array deletion.
Deleting array will cause to delete all the data in the array.

13.4 Checking and Editing Firmware

Purpose
You can view the information of the firmware and set the background task speed on the Firmware
interface.
Step 1 Enter the Firmware interface to check the information of the firmware, including the
version, maximum physical disk quantity, maximum array quantity, auto-rebuild status, etc.
Step 2 You can set the Background Task Speed in the drop-down list.
Step 3 Click the Apply button to save the settings.
Digital Video Recorder User Manual
Figure 13-15 Array Settings Interface
to delete the array.
Figure 13-16 Confirm Array Deletion
Figure 13-17 Firmware Interface
221