Kenwood AW20011012 Instructions Manual page 8

6 With the attachment in the position
shown, locate to the slow speed
outlet and rotate to lock in place
7 Tighten the ring nut firmly by hand.
8 Fit the tray
bn
9 Switch to speed 1 and using the
pusher, gently push your mixture
through. Cut into lengths.
stuffed kebbe recipe
outer casing
500g (1lb 2oz) lamb or fat-free
mutton, cut into strips
500g (1lb 2oz) bulgur wheat, washed
and drained
1 small onion, finely chopped
Important
Always use the bulgur wheat straight
away after draining. If it is allowed to
dry out, it may increase the load on
the mincer resulting in damage.
1 Using the fine screen, mince
alternate batches of meat and
wheat.
2 Mix. Then mince twice more.
3 Stir the onion into the mix.
4 Push through, using the kebbe
maker.
Filling
400g (10oz) lamb, cut into strips
15ml (1tbsp) oil
2 medium onions, finely chopped
5-10ml (1-2tsp) ground allspice
15ml (1tbsp) plain flour
salt and pepper
1 Using the fine screen, mince the
lamb.
2 Fry the onions until golden brown.
Add the lamb.
3 Add the remaining ingredients and
cook for 1-2 minutes.
4 Drain off any excess fat and allow to
cool.
To finish
1 Push the casing mixture through,
using the kebbe maker.
2 Cut into 8cm (3") lengths.
3 Pinch one end of the tube to seal it.
Push some filling – not too much –
into the other end, then seal.
4 Deep fry in hot (190˚C) oil for about 6
minutes or until golden brown.
.
care and cleaning
1 Loosen the ring nut manually or with
.
bm
the spanner
2 Re-assemble.
3 Remove the lid of the pusher and
store the sausage and kebbe
attachments inside.
4 If you keep the attachment on your
machine, put the dish/cover on the
tray as a dust cover.
sausage fillers/kebbe maker
Wash in hot soapy water and dry
thoroughly.
service and customer
care
UK only
If you need help with:
using your attachment
l
servicing or repairs (in or out of
l
guarantee)
Z call Kenwood customer care on
0345 222 0458. Have your
model number (KAX950ME)
and date code (e.g. 20B08)
ready. They are on the attachment
outer carton.
spares and attachments
l
Z call 0844 557 3653.
other countries
If you experience any problems with
l
the operation of your attachment,
before requesting assistance visit
www.kenwoodworld.com.
Please note that your product
l
is covered by a warranty, which
complies with all legal provisions
concerning any existing warranty
and consumer rights in the country
where the product was purchased.
If your Kenwood product
l
malfunctions or you find any
defects, please send it or bring
it to an authorised KENWOOD
Service Centre. To find up to date
details of your nearest authorised
KENWOOD Service centre visit
www.kenwoodworld.com or the
website specific to your Country.
Designed and engineered by
l
Kenwood in the UK.
Made in China.
l
5
and dismantle.
5