Usage - Dexter Laundry WC0300XA-10EC4X Service Manual

Date:
The control uses a Real Time Clock (RTC) to internally track the time and date. The RTC continues opera-
tion even if the control loses external power. The RTC is set for the current date. However, if a problem
occurs and the RTC date is not accurate, it can be reset to the current date using this option.
The day of the month in "DATE" can be set by using the "Up" or "Down" buttons to change the number
that is flashing. Once the desired day of the month is chosen, press the "Enter" button to move to the
month of the year. Once the desired month of the year is chosen, press the "Enter" button to move to the
year. Once the day, month and year are all chosen, the "Enter" button must be held down for 3 seconds to
confirm that RTC is meant to be reset to the complete entry.
Out of Service:
The control can be put into an Out-of-Service mode via manual programming. When the mode is "ON", the
control will scroll "OUT OF SERVICE" on the display. The machine will not react to any vend input and will
not operate when in this mode. The factory default is "OFF".
Drive Table:
The control knows what model of washer it is installed in based on various inputs including information it
receives from the Variable Frequency Drive (VFD). However, because multiple VFD's can be used on the
same model, depending on when it was manufactured, the "DRIVE TABLE" option is available. "DRIVE ER-
ROR 1" will display on the control when the Drive Table setting does not match the appropriate VFD in the
washer.
a. Choose "Drive 3" for C4 models (ex. WC0600XA-12EC4X-)
b. Choose "Drive 2" for C1, C2, or C3 models (ex. WC0600XA-12EC2X-)
c. Choose "Drive 1" for WCAD models (ex. WCAD40KCS)
Usage Menu:
The Usage menu allows for the user to track data about machine usage. See below for detailed informa-
tion on each sub menu option.
Figure 8, shown below, shows the sub menu options for Usage:

USAGE

54
Part # 8533-114-001 8/21
COIN_AUDIT
CYCLE_COUNT
MOTOR_HOURS
CYCLE_HOURS
LEFT_00000-99999
RIGHT_00000-99999
DEFAULT
00000-99999
SET_COUNT
DEFAULT
00000-99999
SET_HOURS
DEFAULT
00000-99999
SET_HOURS
DEFAULT
RESET
00000-99999
RESET
00000-99999
RESET
00000-99999
RESET