Dexter Laundry WCAD Series Programming Instructions Manual
  1. Manuals
  2. Brands
  3. Dexter Laundry Manuals
  4. Washer
  5. WCAD Series
  6. Programming instructions manual

Dexter Laundry WCAD Series Programming Instructions Manual

Vended washers
Hide thumbs Also See for WCAD Series:
1
2
3
4
5
6
Table of Contents

Advertisement

Quick Links

Download this manual
WCAD-Series Vended Washers
Machine Programmng Instructions
1
Part # 8533-066-001 5/11

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WCAD Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Dexter Laundry WCAD Series

Summary of Contents for Dexter Laundry WCAD Series

  • Page 1 WCAD-Series Vended Washers Machine Programmng Instructions Part # 8533-066-001 5/11...
  • Page 2 Programming Instructions Programming can be accomplished manually using the machine controls or by connecting to the machine control using a PDA (personal digital assistant). For instructions on using a PDA with this washer control, please contact your local Dexter distributor. Please read below for manual programming instructions.
  • Page 3 #4 Warm Water Price: The next step in the pricing program is to set the additional price for Warm water usage. The display will blink fi rst “CH P” indicating cold/hot water mix price and then “00.00”. To change the value, use the Hot temperature button to decrease and the Warm temperature button to increase.
  • Page 4 To change the washer cycle, push the Hot temperature button once. The display will change to “C 1”, indicating cycle one is selected. The temperature buttons are used to make changes to the program. In the program mode, these buttons will do as displayed in drawing below. When the display shows “C 1”, push Enter.
  • Page 5 Coin Washer Cycle Parameter Ranges The range of each cycle parameter is shown below: Bath Cycle Time “ct” 0 to 15 minutes for Prewash, Rinse1 and Rinse 3 to 15 minutes for Wash and Final Rinse. For the baths that can, if the time is set to zero, then that bath will be eliminated from the cycle.

  • Page 6: Rapid Advance Mode

    Coin Washer Default Cycle (Preset at Factory) The following table shows the complete details for the coin washer default cycle. Bath Bath Cycle Time (min.) Water Temp. Water Level* Delay Fill Spin Time (min.) IS * Prewash Wash Rinse 1 Rinse 2 Final Rinse *NOTE:...

Table of Contents