Table of Contents
Advertisement
Standby Generator Sets
General Information
GENERATOR AC LEAD CONNECTIONS
FOUR-LEAD, SINGLE-PHASE STATOR
Four-lead generators (see Figure 7.1) are designed to
supply electrical loads with voltage code "A" (240V,
1-phase, 60 Hz). Electrical power is produced in the
stator power windings. These windings were con-
nected at the factory to the main circuit breaker as
shown in Figure 7.1.
The rated voltage between each circuit breaker ter-
minal is 240V. The rated voltage between each circuit
breaker terminal and the neutral point 00 is 120V.
Figure 7.1 — Four-lead, Single-phase Stator
7-1
Advertisement
Table of Contents
Need help?
Do you have a question about the 005191-1 and is the answer not in the manual?
Questions and answers
Does the 005199-1 generac generator come with an automatic transfer switch?