Appendix Ii: Parallel Function - MPP Solar HYBRID LV 6048 User Manual

Appendix II: Parallel function

1. Introduction
This inverter can be used in parallel with four different operation modes.
1. Parallel operation in single phase with up to three units. The supported maximum output power is
18KW/18KVA.
2. Maximum three units work together to support split phase equipment. The supported maximum output
power is 18KW/18KVA.
3. Maximum three units work together to support two of three-phase equipment. The supported maximum
output power is 18KW/18KVA.
4. Three units work in parallel to support three-phase equipment, one inverter in each phase. The supported
output power is 18KW/18KVA.
2. Package Contents
In parallel kit, you will find the following items in the package:
Parallel communication cable
3. Mounting the Unit
When installing multiple units, please follow the illustration below.
20CM
NOTE: For proper air circulation to dissipate heat, allow a clearance of approx. 20 cm to the side and approx.
50 cm above and below the unit. Be sure to install each unit in the same height.
Current sharing cable
20CM
32
50CM
20CM
50CM
20CM