Recall Program - Ricoh Priport DX 3240 Operating Instructions Manual

G
Press the {Start} key.

Recall Program

Note
❒ You can store up to 10 entries for
Memory mode with each entry
containing settings for up to 30
originals (Normal Memory mode),
or settings for up to 30 classes
(Stack Memory mode).
❒ You can store up to 10 entries for
Class mode with each entry con-
taining settings for up to 24 combi-
nations of classes and numbers of
prints.
Storing Normal Memory Mode Settings
A
Press the {User Tools} key.
B
Use the {U}{T} keys to select 4
Initial Settings, and then press
the {OK} key.
C
Use the {U}{T} keys to select 7
Program/Change Memory, and
ANT015S
then press the {OK} key.
D
Use the {U}{T} keys to select a
number, and then press the {OK}
key.
Note
❒ If the number is already in use,
a message will be displayed
asking if you wish to overwrite
the settings stored. To over-
write, press the {OK} key. Oth-
erwise press the {Escape} key to
return to the previous display,
and then select another number.
ANT027S
Printing Functions
3
49