JL Audio Stealthbox SB-F-ESCP/10W1V3 Installation Manual

I N S T A L L A T I O N G U I D E
for the
SB-F-ESCP/10W1v3
SKU#94440
2001-2011 Ford Escape, Mazda Tribute
2005-2011 Mercury Mariner
Thank you for choosing a JL Audio Stealthbox for your automotive sound system. With proper installation, your new
®
vehicle-specific enclosed subwoofer system will deliver years of listening pleasure.
We strongly recommend that you have your new Stealthbox
installation professionals employed by your dealer have the necessary tools and experience to disassemble and
reassemble your vehicle properly. Also, keep in mind that your warranty coverage extends to 2 years if your system is
installed or approved by your authorized JL Audio dealer. If you prefer to perform your own installation, please read
this installation guide completely
before beginning the process.
installed by your authorized JL Audio dealer. The
®
If you choose to perform the installation yourself, it is absolutely vital that
the Stealthbox ® be properly mounted to the vehicle according to these
instructions. Failure to mount the enclosure properly presents two problems:
1) The sub-bass performance will suffer due to the movement of the enclosure
caused by the force exerted by the woofer(s).
2) A loose enclosure presents a serious safety hazard in the event of a collision
or sudden deceleration.
SB-F-ESCP/10W1V3 INSTR_SKU# 011286
INSTALLATION
D I F F I C U L T Y :
3
OUT
OF
ESTIMATED TIME:
2-3 HOURS
S T E P 1
Remove the cover in front of the pocket as shown.
S T E P 2
This is how it looks after removing the cover.
S T E P 3
Remove the woofer from the Stealthbox®. Hold the
enclosure in place and use a marker to mark the interior
panel through the hole in the back of the Stealthbox®
Continued on Next Page
5