Connecting The Power Supply - ViewSonic PJ1165 User Manual

Connecting to a monitor
Monitor
RGB in RGB cable
Connecting to a speaker (with amplifier)
Speaker
Audio in
Stereo Mini cable

Connecting The Power Supply

WARNING
• Use extra caution when connecting the power cord as incorrect or faulty connections
may result in fire and/or electrical shock. Please adhere to the "Quick Start Guide" and
the following.
• Only plug the power cord into outlets rated for use with the power cord's specified
voltage range.
• Only use the power cord that came with the projector. If it is damaged, contact your
dealer to newly get correct one.
• Never modify the power cord. Never attempt to defeat the ground connection of the
three-pronged plug.
• Make sure that you firmly connect the power cord to the projector and wall outlet.
Connect the connector of the power cord
1
to the AC inlet of the projector.
Firmly plug the power cord's plug into the
2
outlet.
Projector
RGB OUT
Projector
AUDIO OUT
AC Inlet
Connector
ViewSonic PJ1165
Outlet
Plug
11