Table of Contents
Advertisement
Other Care
WARNING
• Please carefully read the "Quick Start Guide".
• Before caring the air filter, make sure the power switch is off and the power cable is not
plugged in.
• Be cautious of high temperature. Do not touch about the lens and ventilation openings
during use or immediately after use prevent a burn.
• Never try to care for the inside of the unit yourself. Doing so is dangerous.
CAUTION
In correct care could have adverse influence such as coloration, peeling paint, etc.
• Do not use cleaner or chemicals other than those listed below, including benzene and
paint thinner.
• Do not use aerosols or sprays.
• Do not polish or wipe with hard objects.
Caring For The Inside Of The Projector
In order to ensure the safe use of your projector, please have it cleaned and inspected by
your local dealer about once every 2 years.
Caring For The Lens
Turn off the projector, and unplug the power cord.
1
Lightly wipe the lens with a commercially available lens-cleaning wipe. Do not touch the
2
lens directly with your hand.
Caring For The Cabinet And Remote Control
Turn off the projector, and unplug the power cord.
1
Wipe lightly with gauze or a soft cloth.
2
If soiling is severe, dip soft cloth in water or a neutral cleaner dilute in water, and
memo
wipe lightly after wringing well. Then, wipe lightly with a soft, dry cloth.
ViewSonic PJ1165
40
Advertisement
Table of Contents
