Adjusting The Picture Position
This function is available only for RGB signals.
memo
Press the POSITION button.
1
As illustrated on the right, a dialog
will appear on the screen to aid you
in adjusting the picture position.
Use the cursor buttons
2
adjust the position.
When you want to initialize the position, press the
memo
RESET button during adjustment.
Press the POSITION button again to close the dialo and
3
complete this operation.
Even if you don't do anything, the dialog will
memo
automatically disappear after a few seconds.
Correcting The Keystone Distortion
Press the KEYSTONE button.
1
As illustrated on the right, a dialog will appear
on the screen to aid you in correcting the
keystone distortion.
Use the cursor buttons
2
direction of distortion to correct (
Use the cursor buttons
3
Press the KEYSTONE button again to close the dialog and
4
complete this operation.
Even if you don't do anything, the dialog will
memo
automatically disappear after a few seconds.
to
/ / /
to select the
/
or
).
/
to correct the distortion.
Cursor
buttons
POSITION
button
RESET
button
Cursor
buttons
KEYSTONE
button
ViewSonic PJ1165
18