Connecting Power Supply - ViewSonic PJ452 - LCD XGA Projector-4.9LBS User Manual

Connecting power supply

WARNING ►Please use extra caution when connecting the power cord as
incorrect or faulty connections may result in fire and/or electrical shock.
• Only use the power cord that came with the projector. If it is damaged, contact
your dealer to newly get correct one.
• Only plug the power cord into an outlet rated for use with the power cord's
specified voltage range.
• Never modify the power cord. Never attempt to defeat the ground connection of
the three-pronged plug.
Before connecting, make sure that the power switch is the OFF position (pressed
the side marked "O").
Power switch AC Inlet
Connector of the power cord

1. Connect the connector of the power cord to the AC inlet of the projector.
2. Firmly plug the power cord's plug into the outlet.
ViewSonic PJ452 15