Table of Contents
Advertisement
About This Manual
This manual is written for professional system integrators and PC technicians.
It provides information for the installation and use of the SuperServer
6028TP-DNCR/DNCTR/DNCFR. Installation and maintainance should be performed
by experienced technicians only.
The SuperServer 6028TP-DNCR/DNCTR/DNCFR is a high-end server based
on the
SC827HD+-R1K68B 2U rackmount chassis and the dual processor
X10DRT-P/PT/PIBF serverboard.
Manual Organization
Chapter 1: Introduction
The first chapter provides a checklist of the main components included with
the server system and describes the main features of the X10DRT-P/PT/PIBF
serverboard and the SC827HD+-R1K68B chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer
6028TP-DNCR/DNCTR/DNCFR into a rack and check out the server configuration
prior to powering up the system. If your server was ordered without processor and
memory components, this chapter will refer you to the appropriate sections of the
manual for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Chapter 4: Standardized Safety Warnings
You should thoroughly familiarize yourself with this chapter for a general overview
of safety precautions that should be followed when installing and servicing the
SuperServer 6028TP-DNCR/DNCTR/DNCFR.
Chapter 5: Advanced Serverboard Setup
Chapter 5 provides detailed information on the X10DRT-P/PT/PIBF serverboard,
including the locations and functions of connections, headers and jumpers. Refer
to this chapter when adding or removing processors or main memory and when
reconfiguring the serverboard.
Preface
iii
Preface
Advertisement
Table of Contents
