Advertisement
Parts
Interface unit
Fixing screw
Fixing screw
Mounting cord
Fastener
Holder
Clip
(with connecting
for
for
clamp
(for bundling
cable)
3.5×16 mm
4×16 mm
the wires)
Connecting the Wi-Fi Interface
(For details about your heat pump, see the relevant installation manual)
Before dismantling the indoor unit, turn the power off and make sure that the
power has been disconnected from the complete system.
Dismantle the indoor unit in accordance with the service manual to access the
main control PCB.
Locate the CN105 port on the main control PCB and connect the Wi-Fi interface.
When mounting the interface unit
inside an indoor unit, refer to the
installation manual of the indoor unit. Do not mount the interface
unit
inside the indoor unit, unless mentioned in the manual.
9
Advertisement
