Advertisement
Troubleshooting
: ON
: OFF
Description
Connection to server established,
and connection to indoor unit
failed
Connection to Router failed,
and connection to indoor unit
established
Connection to Router failed,
and starting up indoor unit
connection
Connection to Router failed, and
connection to indoor unit failed
Connection to server failed,
and connection to indoor unit
established
Connection to server failed, and
starting up indoor unit connection
Connection to server failed, and
connection to indoor unit failed
Check the following first in the cases listed in the above table.
• Make sure that the communication distance is not too far between the Wi-Fi
interface and the Router.
• Make sure 2.4GHz is enabled on dual band Routers.
• Make sure that WPS is working on the Router.
• Make sure that the Router is compatible with the Wi-Fi interface.
• If Static IP has been set - make sure it is correct as per Router network settings.
• Make sure that the Router uses WPA2-PSK(AES) encryption.
• Make sure that the number of connected devices to the Router does not
exceed the limit.
16
: Flashing
ERR
(Orange)
(*2)
(*2)
(*2)
NET
MODE
(Green)
(Orange)
UNIT
(Green)
Advertisement
