Advertisement
5
For MAC-588IF-E, Scan the matrix
barcode from the label on the back
of the interface to connect to its
network. If you can't connect this Wi-Fi
interface, check the label on the back
of the interface for the SSID.
For MAC-568IF-E, Check the label on
the back of the interface for the SSID.
Open the Wi-Fi networks screen on
your smartphone/tablet and connect
to the network with the same name
as the SSID. The network password,
labelled KEY, is just under the SSID on
the interface.
You will now be connected to this Wi-
Fi interface.
7
12
6
Open Wi-Fi Control App and follow
the 'How to Setup' instructions in the
'Setup Wi-Fi interface' section.
If the app does not go to this section,
you are not connected to the Wi-Fi
interface's Access Point; please start
process again.
You can either select your available
Wi-Fi Network, or manually configure a
Wi-Fi Network.
Once completed, the MAC and ID will
be filled in 'Add new unit'. Select 'Add'
and then control your heat pump via
Wi-Fi.
Advertisement
