Advertisement
To avoid the risk of electrical shock, property damage, personal injury, or death:
• The power cord must be plugged into a 3-prong grounding type wall
receptacle, grounded in accordance with the National Electrical Code,
ANSI/NFPA 70 – latest edition and local codes and ordinances.
• It is the personal responsibility of the consumer to have a proper 3-prong wall
receptacle installed by a qualified electrician.
• DO NOT, UNDER ANY CIRCUMSTANCES, REMOVE THE POWER CORD
GROUNDING PRONG.
• A separate adequately fused and grounded circuit should be available for this
appliance.
• Do not remove any grounding wires from individual components while servicing
unless the component is to be removed and replaced. It is extremely important
to replace all grounding wires when components are replaced.
• Disconnect electrical supply from appliance before servicing.
• Failure to do so could result in death or electrical shock.
Important Safety Information
WARNING
WARNING
ELECTRICAL SHOCK HAZARD
• Replace all panels before operating.
-1-
Advertisement
