Alive Check - Planet GSD-1222VHP User Manual

2.3.6 Alive Check

The GSD/GSW 802.3at PoE+ Switch series can be configured to monitor connected
PD's status in real time via traffic detection. Once there is no traffic at interval
time, the GSD/GSW 802.3at PoE+ Switch series is going to restart PoE port power,
and bring the PD back to work. It will greatly enhance the reliability and reduce
administrator management burden.
Object
Port Select the port number to enable Alive Check.
Allows user to enable or disable per port PD Alive Check
Status
function. All ports are disabled as default value.
PD startup time.
Startup Time
This startup time is based on determining when to start to
(60~300s)
measure the traffic. The default startup time is 180 seconds.
Traffic detection counter.
Interval Time The switch detects no traffic during this time and countdown
(60~300s) for interval time begins and port begins to reboot. The default
interval time is 180 seconds.
PoE Port Disable Timer
Power Off
This column allows user to set the PoE device rebooting time.
(5~60s)
The default power off time is 5 seconds.
26
Description