4.
Press [Permit SSL / TLS Communication].
If the setting to be specified does not appear, press [ Next] to scroll down to other settings.
5.
Select the encrypted communication mode.
Select [Ciphertext Only], [Ciphertext Priority], or [Ciphertext / Cleartext] as the encrypted
communication mode.
6.
Press [OK].
7.
Press the [User Tools/Counter] key.
• The SSL/TLS encrypted communication mode can also be specified using Web Image Monitor. For
details, see Web Image Monitor Help.
• p.37 "Logging on Using Administrator Authentication"
• p.39 "Logging off Using Administrator Authentication"
SNMPv3 Encryption
This can be specified by the network administrator.
When using SmartDeviceMonitor for Admin or another application to make various settings, you can
encrypt the data transmitted.
Protection Using Encryption
211
5