Ricoh Aficio MP W5100 Operating Instructions Manual page 185

6. Specify the recording levels for either [Job Log Collect Level] or [Access Log Collect Level].
The settings shown for "Job Log Collect Settings Listed by Function Type" or "Access Log Collect
Settings Listed by Function Type" vary depending on the collection level selected.
If you change the setting in the list, the setting for [Job Log Collect Level] or [Access Log Collect Level]
automatically changes to [User Settings].
7. Click [Ok].
Changes are also reflected in related log settings.
8. Click [Logout].
• The greater the Access Log Collect setting value, the more logs are collected.
Transfer Logs
Select to disable log transfer.
When log transfer is inactive, [Inactive] is displayed and this setting cannot be changed. When log transfer
is active, log records can be transferred to the log collection system.
1. Follow steps 1 to 4 in "Specify Log Collect Settings".
2. Select [Inactive] under "Transfer Logs".
3. Click [Ok].
4. Click [Logout].
• To enable encryption, [Collect Job Logs] and/or [Collect Access Logs] must be set to [Active].
Encrypt Logs
1. Follow steps 1 to 4 in "Specify Log Collect Settings".
2. Select [Active] under "Encrypt Logs".
To disable log encryption, select [Active].
3. Click [Ok].
The log is encrypted. If other changes have been made in related log settings, they will occur at the
same time.
4. Click [Logout].
• In order to enable encryption, either [Collect Job Logs] or [Collect Access Logs], or both must be set
to [Active].
Managing Log Files
4
183