Table of Contents
Advertisement
Operating the appliance
en
Notes
Do not leave the door open for too
■
long when adding laundry as water
from the laundry may leak out.
For safety reasons, the door remains
■
locked when the water level or
temperature is high, or while the
drum is turning, and it is not possible
to add laundry during this time.
Follow the information on the display
panel.
The load display is not active during
■
reloading.
Changing the programme
If you have started the wrong
programme by mistake, you can
change the programme as follows:
Touch the control panel Ü.
1.
Select another programme.
2.
And touch Ü again.The new
3.
program starts from the beginning.
Cancel the programme
For programs at high temperature:
Touch the control panel Ü.
1.
To cool the laundry: Select Rinse.
2.
And touch Ü again.
3.
For programmes at low temperatures:
Touch Ü.
1.
Select Spin or Drain.
2.
And touch Ü again.
3.
Programme end during rinse
hold
The Ü indicator flashes in the display
panel, and the preset spin speed and
remaining programme length are
displayed for the selected programme.
Continue the programme by:
Touching Ü on the control panel or
■
Changing the spin speed and then
■
touching Ü or
30
Selecting the Less iron S setting
■
and then touching Ü or
Turning the programme selector to
■
Drain and then touching Ü.
Programme end
End lights up in the display panel and
the Ü and ® displays are off.
If the k display flashes, this
Note:
informs you to run the Drum Clean
programme or any other programme at
a washing temperature of at least
60 °C.
Removing laundry/switching
off the appliance
Open the loading door and remove
1.
the laundry.
Switch off the appliance.
2.
Turn off the tap.
3.
Not required for AquaStop
Note:
models.
Notes
Do not leave any items of laundry in
■
the drum. They may shrink in the
next wash or discolour another item.
Remove any foreign objects from the
■
drum and the rubber gasket – risk of
rusting.
Wipe the rubber gasket dry.
■
Leave the loading door and
■
detergent drawer open so that any
remaining water can evaporate.
Always wait until the programme
■
ends; otherwise the appliance could
still be locked. Then switch the
appliance on and wait for it to
unlock.
Advertisement
Table of Contents
