Related Manuals for Siemens WM14T79XES
Summary of Contents for Siemens WM14T79XES
- Page 1 Washing machine WM14T79XES siemens-home.bsh-group.com/welcome Register your product online...
- Page 2 Your new washing machine Caution! This signal word indicates a possibly You have chosen a Siemens washing dangerous situation. Not heeding the machine. caution can cause property and/or environmental damage. Please take a few minutes to read and become familiar with the advantages of Note/tip your washing machine.
-
Page 3: Table Of Contents
Contents e n I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Intended use. -
Page 4: Intended Use
Intended use Appliance settings ..35 Intended use Activating the setting mode ..35 Changing the signal volume ..35 This appliance is intended for private ■... -
Page 5: Safety Instructions
Safety instructions Do not allow children to Safety instructions ■ clean or maintain this appliance unsupervised. T he following safety information Keep children under 3 years S a f e t y i n s t r u c t i o n s and warnings are provided to ■... -
Page 6: Installation
Safety instructions Keep packaging, plastic film dangerous situation. Ensure and packing components away the following: from children. The mains voltage on your ■ power socket must match Warning the rated voltage specified Risk of poisoning! on the appliance Detergents and care products (identification plate). - Page 7 Safety instructions If you take hold of any of the Warning ■ appliance's protruding parts Risk of electric shock/fire/ (e.g. the appliance door) in material damage/damage to order to lift or move it, these the appliance! parts may break off and If the appliance's mains cable is cause injury.
-
Page 8: Operation
Safety instructions The appliance is secured for Caution! ■ transportation by transport Material damage/damage to locking devices. If the the appliance transport locking devices are If the water pressure is too ■ not removed before the high or too low, the appliance is operated, this appliance may not be able to may result in damage to the... - Page 9 Safety instructions Do not use cleaning agents that oxygen. Active oxygen can contain solvents. irritate the mucosa and cause eyes to water. Warning Do not open the door using the Risk of injury! emergency release if a If you support your weight/sit programme is running with ■...
-
Page 10: Cleaning/Maintenance
Safety instructions If you pour the wrong Repairs and any other work ■ ■ quantity of detergent or on the appliance must only cleaning agent into the be conducted by our appliance, this may result in customer service or by an material damage or damage electrician. -
Page 11: Environmental Protection
Environmental protection For safety reasons, use Environmental genuine spare parts and protection accessories only. P ackaging/used appliance Caution! E n v i r o n m e n t a l p r o t e c t i o n Material damage/damage to Dispose of packaging in an the appliance... -
Page 12: Positioning And Connecting
Positioning and connecting The more display segments are Positioning and visible, the higher the respective consumption. connecting This enables you to compare the consumption levels of the different I ncluded with the appliance programmes when choosing your P o s i t i o n i n g a n d c o n n e c t i n g programme settings and decide on Check the machine for transport Note:... -
Page 13: Safety Instructions
Positioning and connecting leaks and water damage, you must P Water supply hose on standard/Aqua- follow the instructions in this section. Secure models *depending on the model Notes In addition to the safety information ■ In addition, a hose clamp ( 24 - 40 mm listed here, the local water and diameter, available from specialist electricity supplier may have special... -
Page 14: Installing The Appliance In A Kitchenette
Positioning and connecting Installing the appliance in a kitchenette Warning Danger of death! There is a risk of electric shock if you touch live components. Do not remove the appliance covering Unscrew and remove all four transport brace screws. plate. Remove the sleeves. -
Page 15: Water Inlet
Positioning and connecting Only tighten the screw connections ■ by hand. If the screw connections are tightened too much with a tool (pliers), the thread may be damaged. Optimum water pressure in the supply network At least 100 kPa (1 bar) Maximum 1000 kPa (10 bar) When the tap is open, the water flow is at least 8 l/min. -
Page 16: Water Outlet
Positioning and connecting Open the water tap carefully, diameter of 24–40 mm (available Note: checking the leak tightness of the from specialist dealers). connection points. The screw connection is under mains water pressure. Water outlet Warning Risk of scalding! Drainage into a wash basin ■... -
Page 17: Electrical Connection
Positioning and connecting Tighten the lock nut against the The mains cable is only replaced by ■ housing. a qualified electrician (if this is In doing so, hold the foot tight and necessary). Replacement mains do not adjust its height. cables are available from the after- The lock nuts on all four appliance sales service. -
Page 18: Transportation
Positioning and connecting Running the programme without laundry: Switch on the appliance. Close the door (do not load any laundry). Set the äDrum Clean î 90 °C programme. Open the detergent drawer. Insert all four sleeves. Pour approximately 1 litre of water Clip the mains cable securely in the into compartment II. -
Page 19: Familiarising Yourself With Your
Familiarising yourself with your appliance Familiarising yourself with your appliance Washing machine F a m i l i a r i s i n g y o u r s e l f w i t h y o u r a p p l i a n c e Service flap Detergent drawer ~ Page 32 Controls... -
Page 20: Controls
Familiarising yourself with your appliance Controls 8 Touch display ( Main switch This shows you the programme You can use the # button to information and selection options switch the appliance on and off. for settings, and you can select 0 Programme selector the settings by touching the You can turn the programme... - Page 21 Familiarising yourself with your appliance Indicators and buttons on the Display for set- Setting control panel tings ( Speed SpeedPerfect ¦ Eco EcoPerfect +1, +2, +3, off Water&Rinse+; + additional rinse cycles « Less iron Prewash Rinse Stop = no final spin w 3 sec Childlock/control panel lock Memory programme...
-
Page 22: Laundry
Laundry Some examples of soiling levels can Laundry be found on ~ Page 23 – Light: Do not prewash, select the P repare the laundry SpeedPerfect setting if L a u n d r y necessary Caution! – Normal Damage to the appliance/fabrics –... -
Page 23: Detergent
Detergent Saving energy and detergent Detergent For light and normal soiling, you can C orrect selection of detergent save energy (lower washing D e t e r g e n t temperature) and detergent. The care label is crucial for selecting the correct detergent, temperature and Saving Soiling/note... -
Page 24: Overview Of Programmes
Overview of programmes Overview of programmes P rogrammes on the programme selector O v e r v i e w o f p r o g r a m m e s Programme/type of laundry/information Settings Programme name Max. load Brief explanation of the programme and the fabrics for which it is Temperature that can be selected (—... - Page 25 Overview of programmes Programme/type of laundry/information Settings Y Delicate / Silk max. 2.0 kg For delicate, washable items, e.g. made of silk, satin, synthetic or — - 40 °C blended fabrics (e.g. silk blouses, silk scarves) 2 - 800 rpm Use a detergent that is suitable for machine-washing deli- Note: ¦...
- Page 26 Overview of programmes Programme/type of laundry/information Settings *** Duvet max. 2.5 kg (Daunen max. 2.0 kg) Machine-washable items stuffed with synthetic fibres, such as pil- — - 60 °C lows, quilts and bedspreads; also suitable for items stuffed with 2 - 1200 rpm down ¦...
- Page 27 Overview of programmes Programme/type of laundry/information Settings äDrum Clean î 0 kg The cleaning programme, combined with an active oxygen phase 90 °C followed by a washing programme, thoroughly cleans and cares 1200 rpm for the drum and outer tub, and eliminates odours. Run the programme, e.g.: before using the appliance for the first time, ■...
-
Page 28: Sensofresh Î
Overview of programmes sensoFresh î Liquid starch can be used to stiffen fabrics particularly in the Rinse and Cottons programmes. Measure starch into compartment M in accordance with sensoFresh î is an innovative the manufacturer's instructions (clean programme that is designed to refresh first if necessary). -
Page 29: Programme Default Settings
Programme default settings increments of 30 minutes and up to a Programme default maximum of 24 h (h=hour). settings After the programme starts, the selected time, e.g. 8.5 h is displayed and counted down until the washing T he programme default settings are P r o g r a m m e d e f a u l t s e t t i n g s programme starts. -
Page 30: Additional Programme Settings30
Additional programme settings The washing's residual moisture Note: Additional programme is increased. settings Water&Rinse+ You can find an overview of all of the A d d i t i o n a l p r o g r a m m e s e t t i n g s additional settings that can be selected «... -
Page 31: Operating The Appliance
Operating the appliance In appliances with a drum light: Operating the The drum is lit after switching on the appliance appliance, after opening and closing the door and after starting a programme. P reparing the washing The light switches off automatically. O p e r a t i n g t h e a p p l i a n c e machine You can:... -
Page 32: Placing Laundry Into The Drum
Operating the appliance Placing laundry into the drum machine. If necessary, immediately wipe away spray residue and other residues/ droplets with a damp cloth. Warning Danger of death! Dosing Items of laundry pretreated with cleaning agents that contain solvents, Dose the detergents and care products e.g. -
Page 33: Start The Programme
Operating the appliance Information on the following programme Dispenser i Softener, starch, steps and settings, which can be do not exceed max. changed during the programme Dispenser I Detergent for prewash sequence, light up at half brightness. Note: Foam detection Pull out the detergent drawer as far If the o display also lights up, the as possible. -
Page 34: Adding Laundry
Operating the appliance Adding laundry flash. If the symbols are off, the door can be opened. After starting the programme, you can add or remove laundry if necessary. Cancel the programme To do this, touch the control panel ‹. For programs at high temperature: The indicator flashes. -
Page 35: Programme End
Appliance settings Programme end Appliance settings End lights up in the display panel and Y ou can change the following settings the ‹ and ® displays are off. A p p l i a n c e s e t t i n g s in the control and display panel: If the ä... -
Page 36: Changing The Brightness Of The Touch Display
Sensors Changing the brightness of Sensors the touch display A utomatic load sensing Touch à again. The display for the S e n s o r s touch display's brightness B and the The automatic load sensing function preset brightness light up. adapts the water consumption ideally to each programme depending on the Change the adjustment value by... -
Page 37: Cleaning And Maintenance
Cleaning and maintenance Machine housing/control Cleaning and panel maintenance Wipe the housing and the control ■ Warning panel with a soft, damp cloth. C l e a n i n g a n d m a i n t e n a n c e Remove the detergent residue Danger of death! ■... -
Page 38: The Drain Hose At The Siphon Is Blocked
Cleaning and maintenance To prevent unused detergent Note: from flowing straight into the drain during the next wash: Pour 1 litre of water into the left-hand compartment and start the programme p Empty. The drain hose at the siphon is blocked Take the auxilary drain hose out of the holder. -
Page 39: Faults And What To Do About Them
Faults and what to do about them. Faults and what to do about them. E mergency release F a u l t s a n d w h a t t o d o a b o u t t h e m . E.g. -
Page 40: Information On The Display Panel
Faults and what to do about them. Drain the water ~ Page 37 Use a tool to pull the emergency release downwards and then release. The washing machine door can then be opened. Information on the display panel Indicator Cause/remedy ®... -
Page 41: Faults And What To Do About Them
Faults and what to do about them. Indicator Cause/remedy o is lit up Too much foam has been detected and additional rinse cycles have been activated. Add less detergent to the next wash cycle with the same load. E:60 alternating with At the end of the programme. - Page 42 Faults and what to do about them. Faults Cause/remedy The spin result is not sat- Not a fault – the unbalanced load detection system has interrupted the spin ■ isfactory. cycle because the laundry is unevenly distributed. Distribute small and large items of laundry evenly in the drum. Laundry wet/too damp.
-
Page 43: After-Sales Service
After-sales service Faults Cause/remedy Noises can be heard after When removing laundry at the end of the programme, you may notice an odour the sensoFresh î pro- produced by the natural by-products of the active oxygen. Shake out the laundry gramme. -
Page 44: Consumption Rates
Consumption rates Consumption rates E nergy and water consumption, programme duration and C o n s u m p t i o n r a t e s residual moisture for the main washing programmes (approximate values) Programme Load Energy consump- Water con- Programme du- tion*... -
Page 45: Technical Data
Technical data Programme Approximate information on the residual moisture*** WM14T... WM12T... WM10T... max 1400 max 1200 max 1000 Î Cottons 48 % 53 % 62 % Ó Easy-Care 40 % 40 % 40 % Y Delicate / Silk 30 % 30 % 30 % Í... -
Page 46: Aqua-Stop Warranty
Aqua-Stop warranty Aqua-Stop warranty O nly for appliances with Aqua-Stop A q u a - S t o p w a r r a n t y In addition to warranty claims against the vendor based on the purchase agreement and to our appliance warranty, we will provide compensation under the following conditions: If water damage is caused due to a... - Page 48 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory. BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY siemens-home.bsh-group.com *9001435795* 9001435795 (9905)